Description
Kairuhs FPV Display Control Board V2.3
The V2.3 control board is the most capable Kairuhs platform to date, supporting aircraft and ground vehicles with full cockpit display control, real-time radar, and now complete standalone operation with no flight controller required.
Supporting up to four independent displays, the board delivers a fully modular cockpit or dashboard layout with assignable roles including PFD, MFD, Radar, HUD, analog gauges, track dashboards, street dashboards, inclinometer, GPS navigation, and more. Each display can be rotated, reassigned, and tuned for adaptive brightness through the sensor ports.
New in V2.3: Factory IMU installation option enables full standalone operation without a flight controller. An optional plug-and-play battery telemetry board adds real-time voltage and current monitoring with auto cell count detection, powering the entire display system through a built-in 5V BEC via simple XT60 inline installation.
The board retains the reliable LoRa module port for long-range peer-to-peer radar and includes a dedicated external 2.4 GHz Wi-Fi antenna for pilot-to-pilot and driver-to-driver awareness during flight, racing, or formation missions. Radar supports up to 15 pilots with adjustable range via transmitter channel.
GPS input port and PWM input port support standalone operation. The GPS port accepts standard modules for position, speed, and heading data. The PWM port provides direct throttle position input.
Sensor ports support ambient light and temperature modules. The temperature sensor can monitor motors, ESCs, VTX units, or nitro and gas engine bays with real-time thermal readouts on your dashboard.
Rear solder pads provide direct access to 5V, GND, TX, and RX for clean FC wiring. Configuration is handled entirely through Wi-Fi AP mode — no CLI, no physical buttons, no laptop required.
Every board ships pre-flashed and bench-tested before delivery.
⚠️ Never power through multiple inputs simultaneously. Verify pin layout before connecting. Read manual before operation.
AVAILABLE CONFIGURATIONS:
Standard — FC-Based Control board only. Requires flight controller for telemetry data. Connect to any UART-capable FC via 5V, GND, RX, TX.
Standalone — No FC Required Control board with factory installed IMU. Fully independent operation. Displays attitude, heading, speed, and more without a flight controller. Battery monitoring requires separate telemetry board.
FC-Free Bundle — No FC Required + Battery Telemetry Control board with factory installed IMU plus plug-and-play battery telemetry board. Full standalone operation with real-time voltage, current, auto cell count detection, and integrated 5V BEC. XT60 inline, no soldering required. Everything pre-configured and tested.
LORA FREQUENCY OPTIONS: 915 MHz — USA, Canada, Mexico, Australia, Brazil, Argentina 868 MHz — EU, UK, Russia, India, Middle East 922 MHz — Japan, Taiwan, South Korea, Hong Kong, Indonesia, Malaysia, Singapore, Thailand, Vietnam, New Zealand No LoRa — Wi-Fi Only also available
📦 Includes: Kairuhs FPV Control Board V2.3 2.4 GHz Antenna Telemetry Cable IMU included in Standalone and FC-Free Bundle configurations Battery Telemetry Board included in FC-Free Bundle only
Displays not included — sold separately.
Units expected to begin shipping March 2026. Small batch production — order early to secure your unit.
YouTube: https://www.youtube.com/@Kairuhshq
Instagram: https://www.instagram.com/kairuhshq
Facebook: https://www.facebook.com/groups/1231576258453632
Thingiverse: https://www.thingiverse.com/KairuhsHQ/designs
Support: kairuhsconsole@gmail.com
This product is intended for experienced RC hobbyists. Always follow local regulations regarding FPV and radio-controlled vehicles. Users are solely responsible for complying with all applicable laws governing radio frequency transmission. The manufacturer is not responsible for damage, injury, or loss resulting from use or misuse of this product.
Reviews
There are no reviews yet.